The vulnerable system is not bound to the network stack and the attacker’s path is via read/write/execute capabilities. Either: the attacker exploits the vulnerability by accessing the target system locally (e.g., keyboard, console), or through terminal emulation (e.g., SSH); or the attacker relies on User Interaction by another person to perform actions required to exploit the vulnerability (e.g., using social engineering techniques to trick a legitimate user into opening a malicious document).
Attack Complexity
High
AC
The successful attack depends on the evasion or circumvention of security-enhancing techniques in place that would otherwise hinder the attack. These include: Evasion of exploit mitigation techniques. The attacker must have additional methods available to bypass security measures in place. For example, circumvention of address space randomization (ASLR) or data execution prevention must be performed for the attack to be successful. Obtaining target-specific secrets. The attacker must gather some target-specific secret before the attack can be successful. A secret is any piece of information that cannot be obtained through any amount of reconnaissance. To obtain the secret the attacker must perform additional attacks or break otherwise secure measures (e.g. knowledge of a secret key may be needed to break a crypto channel). This operation must be performed for each attacked target.
Privileges Required
None
PR
The attacker is unauthenticated prior to attack, and therefore does not require any access to settings or files of the vulnerable system to carry out an attack.
User Interaction
None
UI
The vulnerable system can be exploited without interaction from any human user, other than the attacker. Examples include: a remote attacker is able to send packets to a target system a locally authenticated attacker executes code to elevate privileges
Scope
Unchanged
S
An exploited vulnerability can only affect resources managed by the same security authority. In the case of a vulnerability in a virtualized environment, an exploited vulnerability in one guest instance would not affect neighboring guest instances.
Confidentiality
High
C
There is total information disclosure, resulting in all data on the system being revealed to the attacker, or there is a possibility of the attacker gaining control over confidential data.
Integrity
High
I
There is a total compromise of system integrity. There is a complete loss of system protection, resulting in the attacker being able to modify any file on the target system.
Availability
High
A
There is a total shutdown of the affected resource. The attacker can deny access to the system or data, potentially causing significant loss to the organization.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
SUPPORT COMMUNICATION - SECURITY BULLETIN
Document ID: c00555254
Version: 2
HPSBUX02074 SSRT051251 rev.2 - Apache-based Web Server on HP-UX
mod_ssl, proxy_http, Remote Execution of Arbitrary Code, Denial of
Service (DoS), and Unauthorized Access
NOTICE: The information in this Security Bulletin should be acted
upon as soon as possible.
Release Date: 2006-02-27
Last Updated: 2006-03-15
Potential Security Impact: Remote execution of arbitrary code,
Denial of Service (DoS), and unauthorized access.
Source: Hewlett-Packard Company,
HP Software Security Response Team
VULNERABILITY SUMMARY
Potential security vulnerabilities have been identified with
Apache running on HP-UX. These vulnerability could be exploited
remotely to allow execution of arbitrary code, Denial of Service
(DoS), or unauthorized access.
References: .CVE-2005-2491, CVE-2005-1268, CVE-2005-2728,
CVE-2005-2088
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
HP-UX B.11.00, B.11.11, B.11.23 running Apache-based Web Server
prior to v.2.0.55.
-> HP-UX B.11.04 with Virtualvault 4.7 running Apache 2.x Web
-> Server.
BACKGROUND
The following potential security vulnerabilities are resolved in
the software updates listed below:
CVE-2005-2088 (cve.mitre.org): HTTP Request Smuggling.
CVE-2005-2491 (cve.mitre.org): Integer overflow in pcre_compile.c.
CVE-2005-2728 (cve.mitre.org): Remote denial of service.
CVE-2005-1268 (cve.mitre.org): Remote denial of service.
AFFECTED VERSIONS
-> HP-UX B.11.04 Virtualvault A.04.70 (Apache 2.x)
-> ==============================
-> VaultWS.WS-CORE
-> action: install PHSS_34123 or subsequent
-> HP-UX B.11.04 HP Webproxy A.02.10 (Apache 2.x)
-> ==============================
-> HP_Webproxy.HPWEB-PX-CORE
-> action: install PHSS_34163 or subsequent
For IPv4:
HP-UX B.11.00
HP-UX B.11.11
=============
hpuxwsAPACHE
action: install revision A.2.0.55.00 or subsequent
For IPv6:
HP-UX B.11.11
=============
hpuxwsAPACHE,revision=B.1.0.00.01
hpuxwsAPACHE,revision=B.1.0.07.01
hpuxwsAPACHE,revision=B.1.0.08.01
hpuxwsAPACHE,revision=B.1.0.09.01
hpuxwsAPACHE,revision=B.1.0.10.01
hpuxwsAPACHE,revision=B.2.0.48.00
hpuxwsAPACHE,revision=B.2.0.49.00
hpuxwsAPACHE,revision=B.2.0.50.00
hpuxwsAPACHE,revision=B.2.0.51.00
hpuxwsAPACHE,revision=B.2.0.52.00
hpuxwsAPACHE,revision=B.2.0.53.00
hpuxwsAPACHE,revision=B.2.0.54.00
action: install revision B.2.0.55.00 or subsequent
HP-UX B.11.23
=============
hpuxwsAPACHE
action: install revision B.2.0.55.00 or subsequent
END AFFECTED VERSIONS
RESOLUTION
HP has made the following patches and software updates available
to resolve the issue.
-> For B.11.04 HP has made the following patch available:
-> PHSS_34123 Virtualvault 4.7 OWS (Apache 2.x) update
-> PHSS_34163 Webproxy server 2.1 (Apache 2.x) update
Software updates for the Apache-based Web Server are available
from:
http://h20293.www2.hp.com/cgi-bin/swdepot_parser.cgi/cgi/
displayProductInfo.pl?productNumber=HPUXWSSUITE
HP-UX B.11.00, B.11.11 and HP-UX B.11.23 require the Apache-based
Web Server v.2.0.55.00 or subsequent.
Apache Update Procedure
Check for Apache Installation
----------------------------
To determine if the Apache web server from HP is installed on your
system, use Software Distributor's swlist command. All three
revisions of the product may co-exist on a single system.
For example, the results of the command
swlist -l product | grep -i apache
hpuxwsAPACHE B.2.0.54.00 HP-UX Apache-based Web Server
Stop Apache
-------------
Before updating, make sure to stop any previous Apache binary.
Otherwise, the previous binary will continue running, preventing
the new one from starting, although the installation would be
successful. After determining which Apache is installed, stop
Apache with the following commands:
for hpuxwsAPACHE: /opt/hpws/apache[32]/bin/apachectl stop
Download and Install Apache
-----------------------------
Download Apache from Software Depot:
http://h20293.www2.hp.com/cgi-bin/swdepot_parser.cgi/cgi/
displayProductInfo.pl?productNumber=HPUXWSSUITE
Verify successful download by comparing the cksum with the value
specified on the installation web page.
Use SD to swinstall the depot.
Installation of this new revision of HP Apache over an existing HP
Apache installation is supported, while installation over a non-HP
Apache is NOT supported.
Removing Apache Installation
----------------------------
If you prefer to remove Apache from your system instead of
installing a newer revision to resolve the security problem, use
both Software Distributor's "swremove" command and also "rm -rf"
the home location as specified in the rc.config.d file "HOME"
variables.
%ls /etc/rc.config.d | grep apache hpapache2conf hpws_apache[32]conf
MANUAL ACTIONS: Yes - Update plus other actions
Install the revision of the product.
PRODUCT SPECIFIC INFORMATION
HP-UX Security Patch Check: Security Patch Check revision B.02.00
analyzes all HP-issued Security Bulletins to provide a subset of
recommended actions that potentially affect a specific HP-UX
system. For more information:
http://software.hp.com/portal/swdepot/displayProductInfo.do?
productNumber=B6834AA
HISTORY:
rev.0 - 15 November 2005 Initial Release
Version: 1 (rev.1) Skipped for formatting reasons
Version: 2 (rev.2) - 15 March 2006 included B.11.04
Support: For further information, contact normal HP Services
support channel.
Report: To report a potential security vulnerability with any HP
supported product, send Email to: security-alert (at) hp (dot) com. [email concealed] It is
strongly recommended that security related information being
communicated to HP be encrypted using PGP, especially exploit
information. To get the security-alert PGP key, please send an
e-mail message as follows:
To: security-alert (at) hp (dot) com [email concealed]
Subject: get key
Subscribe: To initiate a subscription to receive future HP
Security Bulletins via Email:
http://h30046.www3.hp.com/driverAlertProfile.php?regioncode=NA&
langcode=USENG&jumpid=in_SC-GEN__driverITRC&topiccode=ITRC
On the web page: ITRC security bulletins and patch sign-up
Under Step1: your ITRC security bulletins and patches
- check ALL categories for which alerts are required and
continue.
Under Step2: your ITRC operating systems
- verify your operating system selections are checked and
save.
To update an existing subscription:
http://h30046.www3.hp.com/subSignIn.php
Log in on the web page:
Subscriber's choice for Business: sign-in.
On the web page:
Subscriber's Choice: your profile summary
- use Edit Profile to update appropriate sections.
To review previously published Security Bulletins visit:
http://www.itrc.hp.com/service/cki/secBullArchive.do
* The Software Product Category that this Security Bulletin
relates to is represented by the 5th and 6th characters of the
Bulletin number in the title:
GN = HP General SW,
MA = HP Management Agents,
MI = Misc. 3rd party SW,
MP = HP MPE/iX,
NS = HP NonStop Servers,
OV = HP OpenVMS,
PI = HP Printing & Imaging,
ST = HP Storage SW,
TL = HP Trusted Linux,
TU = HP Tru64 UNIX,
UX = HP-UX,
VV = HP Virtual Vault
System management and security procedures must be reviewed
frequently to maintain system integrity. HP is continually
reviewing and enhancing the security features of software products
to provide customers with current secure solutions.
"HP is broadly distributing this Security Bulletin in order to
bring to the attention of users of the affected HP products the
important security information contained in this Bulletin. HP
recommends that all users determine the applicability of this
information to their individual situations and take appropriate
action. HP does not warrant that this information is necessarily
accurate or complete for all user situations and, consequently, HP
will not be responsible for any damages resulting from user's use
or disregard of the information provided in this Bulletin. To the
extent permitted by law, HP disclaims all warranties, either
express or implied, including the warranties of merchantability
and fitness for a particular purpose, title and non-infringement."
(c)Copyright 2006 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or
editorial errors or omissions contained herein. The information
provided is provided "as is" without warranty of any kind. To the
extent permitted by law, neither HP nor its affiliates,
subcontractors or suppliers will be liable for incidental, special
or consequential damages including downtime cost; lost profits;
damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration.
The information in this document is subject to change without
notice. Hewlett-Packard Company and the names of Hewlett-Packard
products referenced herein are trademarks of Hewlett-Packard
Company in the United States and other countries. Other product
and company names mentioned herein may be trademarks of their
respective owners.
-----BEGIN PGP SIGNATURE-----
Version: PGP 8.1
iQA/AwUBRBqux+AfOvwtKn1ZEQJA3wCeIkmg3Jsh6buNWiTnLEQJHmX6qpAAoOxt
0oFQMMwWEdfTYZ1lAL3UE1C0
=2DdS
-----END PGP SIGNATURE-----
This information is provided for TESTING and LEGAL RESEARCH purposes only. All trademarks used are properties of their respective owners. By visiting this website you agree to Terms of Use and Privacy Policy and Impressum